Connection to the control
5.5 Establishing a modem connection
5. To finish, reenter the contact telephone number for your modem on the PC.
Figure 5-21
"Parameters" > "Outgoing calls"
6. Close the window.
You will now test the connection which has been set.
See also
Testing the connection (Page 54)
5.5.3.6
Testing the connection
Operating sequence
1. Right-click to access "Object properties..." via the shortcut menu.
2. Select the object properties of the "840D sl" system created previously (see figure below).
54
SINUMERIK Integrate Access MyMachine /P2P (PC)
Operating Manual, 11/2016, A5E39356962B AA