Creating A New Machine As A Copy - Siemens SINUMERIK 840D sl Function Manual

03/2013

6.1.5 Creating a new machine as a copy

Function description
Using SINUMERIK Integrate in a machine requires the machine to be set up first in
the server. To make it easier to set up similar machines, a machine that has
already been set up can be created as a copy. All of the configurations are adopted
by the existing machine, with the exception of the machine master data, which
must be edited as the machine ID will be the unique point of identification for the
new machine.
In addition to copying, the following functions are also available in the "Machines"
menu:
•
Editing the master data of the machine
•
Deactivating, activating or deleting a machine
•
Copying a machine with its settings and user configurations to a new machine
that is then created.
Fig. 6-11: Machine - list
Function
Number of lines
Machine ID
© Siemens AG 2006-2013 All Rights Reserved
SINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2013
Description
Creates a new machine in the user
organization.
The number in the display indicates the
number of lines per screen that can be
shown in this menu. You can select up to 200
lines. A scroll bar appears on the screen.
Displays all machines taken into account in
the filter. The display can be in either
descending or ascending order.
6 Administration
6.1 Management of the organization
Type
ACTION
DISPLAY
SELECTION
DISPLAY
ACTION
6-287