Manual Machine - Siemens SINUMERIK 840D sl Commissioning Manual

Creating a multi-channel program
For multi-channel machining, you require a job list with the following data:
● Program names
● Program type
● G code
● ShopTurn program
● Channel assignment
After you have created a job list, in the "multi-channel data" parameter screen, you can
combine the data from the G code and JobShop, which is then saved as cycle call in the job
list. The "multi-channel data" parameter screen is displayed as soon as at least one
ShopTurn program is contained in a job list.
Only programming G code programs
If the job list only contains G code programs, then you can deactivate the "multi-channel
data" function. To do this, set the following machine data:
MD51228 $MNS_FUNCTION_MASK_TECH
Bit 0
8.9

Manual machine

General Information
"Manual machine" allows you to work with large cycles in manual mode without having to
write programs especially for this purpose.
SINUMERIK Operate (IM9)
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
Software option
You require the "ShopMill/ShopTurn" option to generate and edit
ShopTurn/ShopMill programs.
G code programming without multi-channel data
= 1 Multi-channel data are not listed for job lists that only contain G code programs. The
"multi-channel data" softkey is not displayed.
Software option
You require the following software option in order to use this function:
"ShopMill/ShopTurn"
Customizing the "Machine" operating area
Cross-technology function mask
8.9 Manual machine
101