Angular Milling - Siemens SINUMERIK Series Operating Manual

Working with Manual Machine
16.6 Simple workpiece machining
...
...
16.6.2

Angular milling

The basic effective direction can be selected via the axis direction keys or via the cross-
switching lever. In addition, an angle (α1) can also be entered.
Procedure
Note
Selecting/deselecting the angular milling and changing the angle α1 is only possible in the
reset state.
Parameter
T
D
F
S / V
838
6. Select the axis to be traversed on the machine control panel.
7. Press the <+> or <-> key on the machine control panel.
- OR -
Select the direction with the aid of the cross-switching lever.
The axes are moved at the set machining feedrate.
Note:
Please refer to the machine manufacturer's specifications.
The active direction is graphically displayed in the basic screen by means
of the wind rose.
1. "Manual Machine" is active.
2. Press the "Angular milling" softkey.
3. Select the tool, spindle, and spindle direction and specify the machining
feedrate.
4. Enter the desired angle α1.
Description
Tool name
Cutting edge number
Feedrate
Spindle speed or constant cutting rate
Operating Manual, 08/2018, 6FC5398-7CP41-0BA0
Unit
mm/min
mm/rev
rev/min
m/min
Milling