7.4
Power supply
7.4.1
Application
This interface is provided exclusively for connection of the external power supply.
Note
When using external power supplies (e.g. SITOP), the ground potential must be connected
with the protective ground terminal (PELV).
Pin assignment
Table 7-2
Pin
+
+
M
M
Signal type: VI = voltage input;VO = voltage output
Note
The two "+" or "M" terminals are jumpered in the connector. This ensures the 24 V voltage
is looped through.
NCU 7x0.3 PN, NCU 7x0.3B PN
Manual, 06/2014, 6FC5397-1EP40-5BA1
Power supply X124
Signal name
Signal type
P24
VI
P24
VI
M
VO
M
VO
Meaning
Power supply 24 V
Ground
Connecting
7.4 Power supply
49