Quick M:n Commissioning Based On Examples; Example 1 - Siemens SINUMERIK 840D sl Function Manual

Several Operator Panels on Several NCUs, Distributed Systems (B3)
2.15 Examples
[param NCU_3]
name= any_name3
type= ncu_573
nck_address= 15
plc_address= 15
; NETNAMES.INI, example 3 End
2.15.4

Quick M:N commissioning based on examples

Introduction
The MPI/OPI bus network rules are not described.
See References:
/BH/ Operator Components Manual
Three examples are used to demonstrate the steps involved in starting up an M:N grouping.
Each description begins by presenting a configuration.
2.15.4.1

Example 1

Hardware configuration
The hardware comprises the following components:
● 1 operator panel (PCU50 with HMI Advanced, operator panel, machine control panel)
● Two NCUs with two channels each
Figure 2-45
216
One operator panel for two NCUs
Function Manual, 01/2008, 6FC5397-1BP10-3BA0
Extended Functions