6.10
Starting Symantec Ghost directly
With the "Symantec Ghost" software you can store the entire contents of an SSD as a disk
image. Disk images can be kept on various storage media for subsequent restoration of the
data on the SSD.
Symantec Ghost is included in the PCU base software scope of delivery and on the spare part
SSD for PCU. Symantec Ghost is used by the components of the PCU base software to back
up or restore data.
You can also start Symantec Ghost directly from the prompt to execute the data backup tasks
from the user interface of Ghost. This is necessary, for example, when using CompactFlash
cards.
Procedure
To start Symantec Ghost directly, proceed as follows:
1. Call the prompt from the Service Center or the Service Desktop.
2. Enter "ghost.32.exe" and confirm the entry.
Further information
More information is available in the Internet on website Ghost.com (http://www.ghost.com).
PCU Base Software (IM10)
Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1
Backing up and restoring data
6.10 Starting Symantec Ghost directly
139