Displaying And Editing Settable Zero Offset - Siemens SINUMERIK 828D Operating Manual

Computerized numerical controller for machine tools

Hide thumbs Also See for SINUMERIK 828D:

Table of Contents

Setting up the machine

3.8 Zero offsets

Displaying and editing settable zero offset

All settable offsets, divided into coarse and fine offsets, are displayed in the "Zero Offset -

G54..G599" window.

Rotation, scaling and mirroring are displayed.

Activate settable zero offsets

The settable zero offsets must first be selected in the program before they have an impact.

Select the "Parameter" operating area.

Press the "Zero offset" softkey.

Press the "G54...G599" softkey.

The "Zero Offset - G54..G599" window is opened.

The labeling of the softkeys for the settable zero offsets varies, i.e. the

settable zero offsets configured on the machine are displayed (exam-

ples: G54...G57, G54...G505, G54...G599).

Please observe the machine manufacturer's specifications.

You can edit the values directly in the table.

Operating Manual, 01/2015, 6FC5398-8CP40-5BA2

Sinumerik 840d sl