T,F,S Window - Siemens SINUMERIK 840D sl Operating Manual

Introduction
1.4 Operator interface
1.4.4

T,F,S window

The most important data concerning the current tool, the feedrate (path feed or axis feed in
JOG) and the spindle are displayed in the T, F, and S windows.
Tool data
Display
T
Tool name
Location
D
H
Ø
Feed data
Display
F
Rapid traverse
0.000
Override
Spindle data
Display
S
S1
Speed
24
Meaning
Name of current tool
Location number of current tool
Cutting edge of the current tool
In DIN-ISO mode the H number is displayed instead of the cutting edge
number.
H number (tool offset data record for DIN-ISO mode)
If there is a valid D number, this is also displayed.
Diameter of current tool
Meaning
Feed disable
Actual feed value
If several axes are traversing, the largest axis feed will be displayed
G0 is active
No feed is active
Display as a percentage
Meaning
Spindle selection, identification with spindle number and main spindle
Actual value (when spindle turns, display increases)
Setpoint (always displayed, also during positioning)
Operating Manual, 01/2008, 6FC5398-6AP10-2BA0
HMI sl Universal