Logonnc; Configurencmachinedata; Resetnc - Siemens sinumerik 840d sl Configuration Manual

Configuring PI services of the NC as system functions
9.5 Running NC functions from WinCC
9.5.4

LogonNC

Description
A password is passed on to the NC. The passwords for the HMI device and the NC are
independent of one another.
Parameter
Connection
Password
Procedure on the HMI device
After activating the function, the specified password is used to attempt to log on to the NC.
9.5.5

ConfigureNCMachineData

Description
This function is used to activate all machine data of NEW_CONF classification.
The CLASS parameter permits a more detailed classification. Currently, however, only value
1 is supported.
Parameter
Connection
Class
Procedure on the HMI device
A corresponding PI service is transferred to the NC from the currently valid parameters.
9.5.6

ResetNC

Description
This function triggers a restart at the NC.
Parameter
Connection
128
Meaning
Name of the connection to the NC.
The password that authorizes the NC logon (variable or constant)
Meaning
Name of the connection to the NC.
Classification of the machine data being activated (variable or constant): 1 - 3
Meaning
Name of the connection to the NC.
SINUMERIK Integrate Create MyHMI / WinCC V13 SP1
Configuration Manual, 11/2014