Enable Spindle And Coolant - Siemens SINUMERIK 840D sl Commissioning Manual

8 Tool Management
8.6

Enable spindle and coolant

8.6 Enable spindle and coolant
8-106
Here you can assign a direction of rotation (CW/CCW/OFF) and coolant to a
tool.
Fig. 8-2 Tool list: Coolant and direction of spindle rotation
Coolants are assigned to the appropriate M commands via the following
machine data:
MD 9680 $MM_CMM_M_CODE_COOLANT_I
MD 9681 $MM_CMM_M_CODE_COOLANT_II
MD 9668 $MM_CMM_M_CODE_COOLANT_I_AND_II
MD 9686 $MM_CMM_M_CODE_COOLANT_OFF
SINUMERIK 840D sl Commissioning Manual CNC: ShopTurn – 11/2006 Edition
"Coolant 1/2 ON/OFF"
"Spindle CW/CCW/OFF"
© Siemens AG 2006 All Rights Reserved
11/2006