Changing The Interface; Change Language - Siemens SINUMERIK 840D sl Commissioning Manual

Changing the interface

7.1

Change Language

The HMI sl software is available in 6 languages as standard:
You can set the language in the "Startup" operating area.
Via the display machine data $MM_CHANGE_LANGUAGE_MODE you have the following
options for setting the type of interface language selection.
1. Selecting a language
If the machine data item is $MM_CHANGE_LANGUAGE_MODE = 1 (default setting), you
can select the language as follows:
HMI sl (IM9)
Commissioning Manual, 07/2007, 6FC5397-1DP10-2BA0
1. Select the "Startup" operating area.
2. Press the "Change language" softkey.
The small "Language selection" window opens. The language most
recently set is highlighted.
3. Switch the cursor to the required language.
4. Press the "INPUT" key.
- OR -
7
55