Set Date/Time - Siemens SINUMERIK 840D sl Commissioning Manual

General settings

6.2 Set date/time

Defining two languages
MD9100 $MM_CHANGE_LANGUAGE_MODE
= 2
6.2 Set date/time
You have the possibility of manually setting the date and time for the NCU (PLC and Linux)
or PCU(PC (Windows). In so doing, you can select from various display formats.
52
Selection of two languages. During operation, the "Change language" softkey can be used
to toggle between these languages.
1. Select the "Start-up" operating area.
2. Press the "HMI" softkey.
3. Press the ">>" softkey.
4. Press the "Language selection" softkey.
The "Language selection" window opens.
All the installed languages are displayed in the fields "First language"
and "Second language".
5. Select a language in each of these.
6. Press the <INPUT> key.
- OR -
Press the "OK" softkey.
During operation, you can switch between the two languages by
pressing the "Change language" softkey.
Language selection mode
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
SINUMERIK Operate (IM9)