Changing File And Directory Properties - Siemens SINUMERIK Series Operating Manual

Hide thumbs Also See for SINUMERIK Series:

Table of Contents

Managing programs

14.11 Changing file and directory properties

Changing file and directory properties

Information on directories and files can be displayed in the "Properties for ..." window.

Information on the creation date is displayed near the file's path and name.

You can change names.

Changing access rights

Access rights for execution, writing, listing and reading are displayed in the "Properties"

● Execute: Is used for the selection for execution

● Write: Controls the changing and deletion of a file or a directory

For NC files, you have the option to set the access rights from keyswitch 0 to the current access

level, to be set separately for each file.

If an access level is higher than the current access level, it cannot be changed.

For external files (e.g. on a local drive), the access rights are displayed to you only if settings

have been executed for these files by the machine manufacturer. They cannot be changed via

the "Properties" window.

Settings for the access rights to directories and files

Via a configuration file and MD 51050, access rights of the directories and file types of the NC

and user memory (local drive) can be changed and pre-assigned.

A detailed description of the configuration can be found in the following documentation:

SINUMERIK Operate Commissioning Manual

Select the program manager.

Choose the desired storage location and position the cursor on the file or

directory whose properties you want to display or change.

Press the ">>" and "Properties" softkeys.

The "Properties from ..." window appears.

Operating Manual, 08/2018, 6FC5398-7CP41-0BA0