SINUMERIK Integrate - AMB, AMC, AMM
Precondition
To start the "SINUMERIK Integrate - AMB, AMC, AMM" software, configure a softkey using a
display machine data. To do this you require, as a minimum, authorization for access level 3
(user).
Configuring a softkey
MD9108 $MM_SINUMERIK_INTEGRATE
= 1
References
Information on the software can be found in the following documentation:
Function Manual SINUMERIK Integrate - AMB, AMC, AMM
SINUMERIK Operate (IM9)
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
The "SINUMERIK integrate" softkey is displayed on the extended user interface bar.
20
429