Channel Switchover - Siemens SINUMERIK 840D sl Operating Manual

2.3.2

Channel switchover

It is possible to switch between channels when several are in use. Since individual channels
may be assigned to different mode groups, a channel switchover command is also an implicit
mode switchover command.
Changing the channel
Channel switchover via touch operation
On the HT 8 and when using a touch screen operating panel, you can switch to the next
channel via touch operation in the status display.
See also
HT 8 overview (Page 201)
HMI sl Universal
Operating Manual, 01/2008, 6FC5398-6AP10-2BA0
Press the "CHANNEL" key.
The channel changes over to the next channel or a channel menu
appears.
Setting up the machine
2.3 Modes of operation
45