Operation - Siemens SINUMERIK 840D sl Operating Manual

6.1.3.2

Operation

Using remote control to operate the control system's user interface
If you have used "remote control" to connect to the control system, you will have the following
options for operating the user interface from the PG/PC:
1. Mouse
2. Keyboard
Figure 6-7 Remote control of the control system
Mouse operation
● You can click the softkeys to operate them.
● The symbol for the operating areas is displayed in the top-left corner of the user interface.
● With SINUMERIK 840D sl and 828D click the symbol to display the operating areas on the
horizontal softkey bar.
SINUMERIK Integrate Access MyMachine /P2P (PC)
Operating Manual, 11/2016, A5E39356962B AA
Operator control (software)
6.1 Remote control of the control system
85