Grinding Tools - Siemens Sinumerik 840D sl Programming Manual

Tool offsets
6.5 Tool types
242
250
Tool parameters
The following figure provides an overview of which tool parameters (DP...) for drills are entered
in the compensation memory:
Note
Brief description of the tool parameters can be found on the user interface.
For further information, see:
References:
Function Manual, Basic Functions; Tool Offset (W1)
6.5.4

Grinding tools

The following tool types are available in the "Grinding tools" group:
400
401
402
403
410
411
412
66
Tap Whitworth thread
Reamer
Surface grinding wheel
Surface grinding wheel with monitoring
Surface grinding wheel without monitoring without base dimension (TOOLMAN)
Surface grinding wheel with monitoring without base dimension for grinding wheel periph‐
eral speed GWPS
Facing wheel
Facing wheel (TOOLMAN) with monitoring
Facing wheel (TOOLMAN) without monitoring
Programming Manual, 01/2015, 6FC5398-1BP40-5BA2
Fundamentals