Editing The Password Of The Protection Levels - Siemens SINUMERIK 840D sl Commissioning Manual

Configuring the HMI system
2.1 Protection levels
2.1.2

Editing the password of the protection levels

You can activate the protection levels used with passwords via the user interface.
You can edit the password in the following ways:
● Set new password.
● Change password.
● Delete password.
Password Set
1. Select the "Commissioning" operating area.
2. Press the "Set password" softkey.
3. Enter the appropriate password in the text field "Please enter password" for the particular
area (manufacturer, service, user).
4. Press the "OK" softkey to confirm your entry. A permissible password is set and the valid
protection level is displayed. Invalid passwords will be rejected.
Change password
You must change the standard passwords to obtain a secure access protection.
1. Press the "Change password" softkey.
2. Using the vertical softkeys, select the area (e.g. user) for which you want to assign a new
password.
3. Enter the new password in the input fields "Please enter new password".
4. Press the "OK" softkey to save your entry.
Delete password
Press the "Delete password" softkey. The access authorization is reset.
Access authorization is not automatically deleted at POWER ON!
NOTICE
When a general reset is performed on the NCK, the default passwords are restored.
12
Commissioning HMI-Embedded (IM2)
Commissioning Manual, 01/2008, 6FC5397-8CP10-1BA0