Displaying/Editing Setting Data - Siemens SINUMERIK 840D sl Commissioning Manual

7.4

Displaying/editing setting data

You can access the following setting data via the user interface in the "Startup" operating
area.
● General setting data
● Channel-specific setting data
● Axis-specific setting data
Procedure
SINUMERIK Operate (IM9)
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
1. Select the "Start-up" operating area.
2. Press the "Mach. data" softkey.
3. Press the menu forward key.
The softkeys "General SD", "Channel SD", and "Axis SD" are displayed.
4. Press the relevant softkey to display a particular setting data area.
The window opens and the selected setting data is displayed.
5. Place the cursor on the desired setting data and position the cursor on
the entry to be changed. Enter the desired value.
6. Depending on the activation type, there are two ways of activating the
settings:
Press the "Activate MD (cf)" softkey.
- OR -
Press the "Reset (po)" softkey.
A safety prompt appears.
7. Press the "OK" softkey to trigger a warm restart.
- OR -
Press the "Cancel" softkey if you do not want to apply the settings.
Machine and setting data
7.4 Displaying/editing setting data
73