Changing And Adapting The Machine Model View - Siemens SINUMERIK 840D sl Commissioning Manual

Collision avoidance

14.6 Changing and adapting the machine model view

14.6 Changing and adapting the machine model view
14.6.1 Enlarging or reducing the machine graphic
Precondition
● You are in the graphic machine model editor.
● The "Graphic" and "Autozoom" softkeys are active.
Procedure
Note
Selected section
The selected sections and size changes are kept as long as the program is selected.
Note
Mouse operation
Using the mouse wheel, you have the option of shifting the model in the graphic view.
240
1. Position the cursor in the graphic.
2. Press the "Zoom +" softkey if you wish to enlarge the size of the
section.
- OR -
Press the "Zoom -" softkey if you wish to reduce the size of the section.
- OR -
Press the "Auto zoom" softkeys if you wish to automatically adapt the
segment to the size of the window.
The automatic scaling function takes into account the largest expansion
of the model.
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
SINUMERIK Operate (IM9)