Ambient Climatic And Mechanical Conditions; Transport And Storage Conditions - Siemens SINUMERIK 840D sl Manual

The measures for EMC-compliant design of the system are described in detail in this manual
respectively in the Installation Guideline EMC.
Please note that the final statement on compliance with the standard is given by the respective
label attached to the individual unit.
7.3

Ambient climatic and mechanical conditions

7.3.1

Transport and storage conditions

The components of the SINUMERIK 840D sl system exceed the requirements according to
EN 61800‑2 with regard to shipping and storage conditions.
The following data applies under the following conditions:
● Long-term storage in the transport and product packaging:
At weather-protected locations that have continuous contact with outside air through
openings.
● Transport in the transport packaging:
– In unventilated containers under conditions not protected from weather effects.
– In the "cold" in accordance with outside air.
– Air transport in the air-conditioned cargo hold.
Table 7-2
Type of condition
Classification
Climate class
Ambient temperature
Biological environmental condi‐
tions
Chemically active environmental
conditions
Mechanical environmental condi‐
tions
Maximum permissible tempera‐
ture change
Relative humidity (without conden‐
sation)
Precipitation, rain
Water other than rain
Operator panel front: OP 012
Manual, 05/2019, A5E36371591B AB
Ambient conditions during storage and transport
1)
Class 2M3 according to EN
60721-3-2, in transport pack‐
Direct interaction in air/air:
-40°/+30° C at 95% relative
1 m/s and wet loading surfa‐
7.3 Ambient climatic and mechanical conditions
Permissible range/class
Transport
EN 60721-3-2
2K4
-40° C ... +70° C
2B1
2)
2C2
3)
aging
4)
humidity
5 to 95%
6 mm/min
2)
ces
6)
Technical specifications
Storage
EN 60721-3-1
1K4
-25° C ... +55° C
1B1
2)
1C2
3)
Class 1M2 according to EN
60721-3-1, in product packag‐
ing
5)
30 k/h
Not permissible
Not permis‐ 1 m/s and wet
sible loading surfaces
7) 6)
81