Operating Diagrams - Siemens SINUMERIK 840Di sl Function Manual

12/2008
Individual measurements for an axis
Measurements that are not generated by the measurement series are displayed in
a table. The measurements to be displayed can be selected in this table. Several
measurements can be selected.
Fig. 2-17: Table of individual measurements
Displaying individual measurements
The "Display table of individual measurements" function opens each of the
individual measurements selected in a separate diagram.

2.2.2 Operating diagrams

General control elements
Function
Minimize diagram
Restore diagram
Maximize diagram
Close diagram
Setting and displaying
markings
© Siemens AG 2008 All Rights Reserved
ePS Network Services, Function Manual (FH) - Release 12/2008
2.2 Variable monitors - Measurements and measurement series
Description
Reduces the diagram so that only the header line
is visible.
Restores the minimized diagram to its standard
size.
Magnifies the diagram so that it fills the entire
diagram space.
Closes the diagram
A pair of markings can be set in the diagram. Left-
click to set the first marking. Move the cursor
without pressing any buttons to position the
second marking, and then left-click. The markings
can be reset if you wish.
The markings are deleted by means of the "Delete
markings" function in the "Display" menu.
2 Maschine information
2-37