Kinematic Transformation; Milling On Turned Parts (Transmit) - Siemens SINUMERIK 840D sl Programming Manual

7.8

Kinematic transformation

7.8
7.8.1

Milling on turned parts (TRANSMIT)

Function
The TRANSMIT function enables the following:
• Face machining on turned parts in the turning clamp (drill-holes, contours).
• A cartesian coordinate system can be used to program these machining operations.
• The control maps the programmed traversing movements of the Cartesian coordinate
• A tool center offset relative to the turning center is permitted.
• The velocity control makes allowance for the limits defined for the rotations.
Job planning
Programming Manual, 03/2006 Edition, 6FC5398-2BP10-1BA0
system onto the traversing movements of the real machine axes (standard situation):
– Rotary axis
– Infeed axis perpendicular to rotary axis
– Longitudinal axis parallel to rotary axis
– The linear axes are positioned perpendicular to one another.
Transformations
7.8 Kinematic transformation
7-51