Configuring User-Specific Key Labeling - Siemens SINUMERIK 840D sl Commissioning Manual

HT 8

25.2 Configuring user-specific key labeling

25.2 Configuring user-specific key labeling
Labeling the keys for the HT 8
The texts of the CPF menu (CPF: Control Panel Function) for the HT 8 can be labeled with
your own texts in the particular language of the country.
The texts are created in the "slck_xxx.ts" file.
"xxx" = language code for the corresponding language-specific labeling.
You can create and edit this file using the HMI or also externally on a PC.
Note
If you wish to create or edit the file on a PC, use an editor that supports UTF-8 coding.
Language code in file names "xxx"
Language
German
English
French
Spanish
Italian
Chinese
Creating key labeling
Tag
source
comment
translation
remark
chars
lines
598
Language code
deu
eng
fra
esp
ita
chs
Meaning
Designation for the user softkey. "SK_USERKEY1" to "SK_USERKEY16" are
possible, whereby the names may not be changed.
User-specific description of the key assignment.
Text that should be shown on the key.
A maximum of 10 characters are possible per line.
•
2-line labeling is possible, whereby the line break is set using "%n".
•
Remark for key assignment.
Number of characters. A maximum of 10 characters per line are possible.
Number of lines. 2 lines are possible.
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
SINUMERIK Operate (IM9)