Tool management
13.5 Tool list
Icon/
Marking
Gray double arrow (con‐
figurable)
Red "X"
Procedure
See also
Displaying tool details (Page 660)
Changing a tool type (Page 664)
13.5.1
Additional data
The following tool types require geometry data that is not included in the tool list display.
Tools with additional geometry data
Tool type
111 Conical ballhead cutter
121 End mill with corner rounding Corner radius
130 Angle head cutter
131 Angle head cutter with cor‐
ner rounding
140 Face milling
155 Bevel cutter
640
1.
Select the "Parameter" operating area.
2.
Press the "Tool list" softkey.
The "Tool List" window opens.
Additional parameters
Corner radius
Geometry length (length X, length Y, length Z)
Wear length (Δ length X, Δ length Y, Δ length Z)
Adapter length (length X, length Y, length Z)
V (direction vector 1 - 6)
Vector X, vector Y, vector Z
Geometry length (length X, length Y, length Z)
Corner radius
Wear length (Δ length X, Δ length Y, Δ length Z)
Adapter length (length X, length Y, length Z)
V (direction vector 1 - 6)
Vector X, vector Y, vector Z
External radius
Tool angle
Taper angle
Meaning
The magazine location is positioned at the loading position.
The magazine location is disabled.
Operating Manual, 05/2017, A5E40868956
Milling