Workstation - Siemens SINUMERIK 840D sl Operation/Programming Manual

Introduction
1

1.2 Workstation

1.2 Workstation
Turning machine
PLC
Operator panel
Machine control panel
1-18
In addition to the lathe with CNC/positioning control, a ShopTurn
workstation also has an operator panel and machine control panel.
Turning machine
complete with control
Workstation configuration
You can use ShopTurn on a single-slide lathe with three axes, of a
main spindle, of a tool spindle, and of a counter-spindle.
ShopTurn runs on the SINUMERIK 840D sl CNC-controller with
ShopTurn on NCU (HMI Embedded) and PCU 50.3 (HMI Advanced).
Communication with ShopTurn is done via the operator panel.
You operate the lathe using the machine control panel.
SINUMERIK 840D sl Operation/Programming ShopTurn (BAT) – 08/2005 Edition
08/2005
Operator
panel
Machine
control panel
♥ Siemens AG, 2005. All rights reserved
1