2.1.4
Result parameters
Definition
Result parameters are measurement results provided by the measuring cycles.
Parameters
_OVR[ ]
_OVI[ ]
Call
The result parameters of the measuring cycles are saved in the channel-specific user
variables. These can be called from the operating area as follows:
Measuring versions
Which result parameters are output from the measuring cycles, is described in the individual
measuring versions.
For workpiece measurement with tool offset or offset in the WO, several measuring versions
also supply result parameters, see Chapter Additional result parameters (Page 255).
Measuring cycles
Programming Manual, 02/2011, 6FC5398-4BP40-0BA0
Type
Meaning
REAL
Result parameter - real number:
Setpoint values, actual values, differences, offset values, etc.
INTEGER
Result parameter - integer
1. Press the "Parameter" softkey.
2. Press the the "Channel GUD" softkey.
3. Press the "Using variable" softkey.
The result parameters _OVR[ ] and _OVI[ ] are displayed in the
"Channel-specific user variables" window.
Measuring variants
2.1 General requirements
55