Displaying And Editing Details Of The Zero Offsets - Siemens SINUMERIK 840D sl Operating Manual

4.5.7

Displaying and editing details of the zero offsets

For each zero offset, you can display and edit all data for all axes. You can also delete zero
offsets.
For every axis, values for the following data will be displayed:
● Coarse and fine offsets
● Rotation
● Scaling
● Mirroring
Note
Settings for rotation, scaling and mirroring are specified here and can only be changed here.
Tool details
You can display the following details for the tool and wear data for tools:
● TC
● Adapter dimension
● Length / length wear
● EC setup correction
● SC sum correction
● Total length
● Radius / radius wear
Grinding
Operating Manual, 05/2017, A5E40869190
Machine manufacturer
Please refer to the machine manufacturer's specifications.
You can also change the display of the tool correction values between the Ma‐
chine Coordinate System and the Workpiece Coordinate System.
Machine manufacturer
Please refer to the machine manufacturer's specifications.
Setting up the machine
4.5 Zero offsets
81