2.7.2.4
Position spindle
Procedure
Note
You can use this function to position the spindle at a specific angle, e.g. during a tool
change.
• A stationary spindle is positioned via the shortest possible route.
• A rotating spindle is positioned as it continues to turn in the same direction.
HMI sl Universal
Operating Manual, 01/2008, 6FC5398-6AP10-2BA0
1.
Select "JOG" mode.
2.
Press the "T, S, M" softkey.
3.
Select the "Stop Pos." setting in the "Spindle M function" field.
The "Stop Pos." entry field appears.
4.
Enter the desired spindle stop position.
The spindle position is specified in degrees.
5.
Press the "CYCLE START" key.
The spindle is moved to the desired position.
Setting up the machine
2.7 Manual mode
63