Drive Machine Data In Safety Integrated - Siemens SINUMERIK 840D sl Commissioning Manual

Safety Integrated
21.1 Displaying machine data and parameters
Searching for machine data
21.1.4

Drive machine data in Safety Integrated

The drive machine data is listed in the "Selection of Drive MD" window and can be changed.
Activating or deactivating the startup mode
Use the "Drive +" or "Drive -" softkey to select the drive that you want to switch to startup
mode.
Searching for machine data
434
1. Press the "Search" softkey, enter the machine data number being
searched for in the window that opens or a character string that is being
searched for an press the "OK" softkey.
2. Press the "Continue search" softkey if the text position found does not
correspond to the required machine data.
3. Press the "Go to start" or "Go to end" softkey to set the cursor to the
beginning or to the end of the displayed data.
4. Press the "Search" softkey if you wish to change the search term.
1. Press the "Search" softkey, enter the machine data number being
searched for in the window that opens or a character string that is being
searched for an press the "OK" softkey.
2. Press the "Continue search" softkey if the text position found does not
correspond to the required machine data.
3. Press the "Go to start" or "Go to end" softkey to set the cursor to the
beginning or to the end of the displayed data.
4. Press the "Search" softkey if you wish to change the search term.
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
SINUMERIK Operate (IM9)