Configure The Tool Lists - Siemens SINUMERIK 840D sl Commissioning Manual

12.2.2

Configure the tool lists

<LISTCONFIGURATION> tag
The entries used for configuring the following list views are located in the
<LISTCONFIGURATION> tag:
● "Tool List" window, identifier
● "Tool Wear" window,
● "Magazine" window,
● "Tool Data OEM" window,
● "Tool Selection" window,
Entry
Enabled
CAPTION
COLUMNX
TOOLTYPE_ALL
TOOLTYPE_XXX
EMPTY_MAG_PLACE
Item
DELETE_COLUMN
INSERT_COLUMN
SINUMERIK Operate (IM9)
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
<SlTmToolwearForm>
<SlTmToolmagazinForm>
This window is hidden in the default configuration. The window is only displayed when
you enable it with
<Enabled>
window can be displayed in the program input screen.
<SlTmToollistForm>
identifier
identifier
identifier
<SlTmTooloemForm>
, see the 2nd example.
<SlTmToolselectionForm>
Meaning
True - window is displayed.
False - window is hidden.
Definition of the list name.
See 1st example: "Tool list" appears on the user interface for the
"TM_CAPTION_TOOLLIST"
Column selection: X stands for the column number.
The column setting applies to all tool types.
The column setting applies to a particular tool type. XXX stands for the
number of the tool type.
The column setting applies to an empty magazine location. Empty
magazine locations appear in a list sorted according to magazine.
Identifier of the list parameter.
See example: The column in which the magazine number and
magazine location are displayed is created for the
identifier.
"ToolInMagInPlace"
Tool parameter identifiers (Page 143)
Cutting parameter identifiers (Page 145)
Monitoring parameter identifiers (Page 148)
Magazine location parameter identifiers (Page 149)
Delete column.
Insert column.
12.2 Configuring the user interface
, see the 1st example.
identifier: In order to select a tool this
identifier.
Tool management
139