Editing Enum Values; Searching For Data - Siemens SINUMERIK 840D sl Commissioning Manual

Machine and setting data

9.8 Searching for data

9.7.3

Editing enum values

You can use a drop-down list box to edit enum elements of drive parameters.
Procedure
9.8 Searching for data
You can search for specific machine, setting and display machine data.
Search strategies
● When a digit or a digit with an index is entered, an exact search for this parameter is
● When text is entered, a full-text search is performed: i.e. the term is sought in the relevant
54
1. Select the "Startup" operating area.
2. Press the "Mach. data" softkey.
3. Select the area (e.g. Control Unit MD) where you want to edit the
parameter.
4. Position the cursor on the entry to be edited.
5. Press the "SELECT" or "INSERT" key.
A window containing a list of all defined enum values and their
descriptions opens.
performed.
Example: If "9" is entered > p9 will be found (but not p99)
table and in the status bar.
Commissioning Manual, 01/2008, 6FC5397-1DP10-3BA0
HMI sl (IM9)