End The Hardware Configuration And Load It To The Plc - Siemens SINUMERIK 840D sl Commissioning Manual

5.2.8

End the hardware configuration and load it to the PLC

End the hardware configuration and load the to the PLC
The project must be saved and compiled to exit the overall configuration and generate the
system data for the PLC:
1. Select the "Station" → "Save and compile" menu.
2. Click the "Load in module" button to load the configuration to the PLC.
The "Select target module" dialog automatically displays both configured communication
partners.
3. Confirm with OK to load into these two modules.
4. Confirm the dialog boxes displayed subsequently with "OK" or "No" for the query "...Should
the module be started now (restart)?".
Note
Check the communication interface under "Target system" → "Diagnostics" → "Operating
state".
5. Close the "HW Config" window.
The next step is to create the PLC program.
CNC Commissioning: NC, PLC, Drive
Commissioning Manual, 12/2019, A5E48312804B AA
5.2 Creating a SIMATIC S7 project (PROFIBUS)
PLC commissioning
69