Copying Function Settings To Several Machines - Siemens SINUMERIK 840D sl Function Manual

3 Setting up functions
3.6 Copy

3.6.2 Copying function settings to several machines

Function description
This function copies any selection of configurations that the user has created
previously from a so-called source machine to a freely definable group of machines
on a 1:1 basis.
Single or several user functions can be copied concurrently or successively. Any
source machine and any target machines to which the user has access can be
selected for copying.
Fig. 3-79: Copying to several machines
Function
Source machine
+/-
Target
machines
3-196
Description
All configurations are listed in groups.
Selecting a group displays all configurations
contained within the group and preselects
them for copying. This preselection can be
switched on and off by selecting the group.
Selecting +/- displays the configurations in a
group or hides the display.
The preselection for copying is made by
selecting an individual configuration. The
preselection can be switched on and off by
selecting an individual configuration.
All selected target machines are listed. The
target machines are selected in the 'Select
machine' menu.
In this menu, the group of target machines is
defined by selecting one or more machines,
SINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2013
© Siemens AG 2006-2013 All Rights Reserved
03/2013
Type
DISPLAY
SELECTION
DISPLAY
SELECTION
DISPLAY