Screen Saver; Interfaces - Siemens SINUMERIK 840D sl Equipment Manual

• The "Menu forward" key advances in the extended horizontal softkey bar.
• The "Menu select" key calls the main menu to select the operating area.
• The "Machine area" key selects the "Machine" operating area.
The key symbols used on the operator panel front are shown below along with the
corresponding function keys on the PC keyboard.
Display
Note
Pixel error according to DIN EN ISO 9241-307, Error class II.
3.2.3

Screen saver

If an image with high contrast is displayed without change for longer than one hour, then the
screen dark switching must be activated for energy efficiency reasons.
The time can be adapted individually. Further information can be found at:
Commissioning of Basic Software and Operating Software, SINUMERIK Operate (IM9)
3.3

Interfaces

Front
USB 1.1 Full Speed (socket, type A) for connecting an external keyboard, mouse and USB flash
drive (see Figure 3-1 View of the OP 010S operator panel front (Page 20)).
Note
Note that the electromagnetic compatibility of commercially available peripheral devices
operated via the USB interface is usually rated for office use only.
For industrial use, components with a higher degree of certification are recommended.
Operator panel front: OP 010S
Equipment Manual, 12/2022, A5E50751046B AA
Key Function corresponds to
the PC key function
<Shift> F9
<Shift> F10
Key Function corresponds to
the PC key function
F9
F10
Description
3.3 Interfaces
21