4.5.4
Displaying and editing base zero offset
The defined channel-specific and global base offsets, divided into coarse and fine offsets, are
displayed for all set-up axes in the "Zero offset - Base" window.
Procedure
Note
Activate base offsets
The offsets specified here are immediately active.
4.5.5
Displaying and editing settable zero offset
All settable offsets, divided into coarse and fine offsets, are displayed in the "Work offset -
G54...G599" window.
Rotation, scaling and mirroring are displayed.
Procedure
Grinding
Operating Manual, 05/2017, A5E40869190
Machine manufacturer
Please refer to the machine manufacturer's specifications.
1.
Select the "Parameter" operating area.
2.
Press the "Zero offset" softkey.
3.
Press the "Base" softkey.
The "Zero Offset - Base" window is opened.
4.
You can edit the values directly in the table.
1.
Select the "Parameter" operating area.
2.
Press the "Work offset" softkey.
Setting up the machine
4.5 Zero offsets
79