Start-Up And Mode Selector Switch - Siemens SINUMERIK 840D sl Manual

5.6

Start-up and mode selector switch

Layout
The Control Unit has two coding switches in the lower section of the front panel.
● The left switch (labeled SIM/NCK) is the NCK startup switch.
● The right switch (labeled PLC) is the PLC mode selector switch.
Figure 5-4
Additional references
/IDsl/ Commissioning Manual CNC Part 1 (NCK, PLC, Drive)
NCU
Manual, 07/2007, 6FC5397-0AP10-2BA0
Setting during normal operation: "0"
Setting during normal operation: "0"
Startup and mode selector switch
Operating and display elements
5.6 Start-up and mode selector switch
41