Accessible Nodes - Siemens SINUMERIK 840D sl Commissioning Manual

Service and diagnostics
18.11 Station-related network diagnostics
Procedure
18.11.4.2

Accessible nodes

By actuating the "Accessible nodes" softkey in the network, the list of accessible nodes on
X120 and, if necessary, on X150, is created and displayed. The list content can be
compared as current topology with a reference topology.
Note
Although handheld terminals and EKS identification systems are not determined for the list of
accessible nodes, they can be added as additional nodes to the topology.
368
1. Select the "Diagnostics" operating area.
2. Press the "Menu forward" key and the "Bus TCP/IP" softkey.
3. Press the "TCP/IP diagnostics" softkey.
The "TCP/IP Diagnostics" window opens and displays the current
availability of the network connections.
4. Press the "Network diagnostics" softkey to browse your networks.
The "Network Status" window opens and displays the addresses of the
HMI (X120) system network, the PN (X150) system network and the
(X130) company network.
The corresponding fields in the window remain empty for non-
accessible networks.
5. Press the "New display" softkey to refresh the display.
- OR -
Press the "DHCP server" softkey to fetch information and query the
status of the DHCP server.
The "DHCP Server" window opens.
For each active DHCP server, the status, the role (priority), the MAC
address, the TCU version and the lease version are displayed in tabular
form in the upper part of the window. The required IP with the
associated address area appears in the lower part of the window. Any
differing data is displayed in red.
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
SINUMERIK Operate (IM9)