Switching The Calculator Help On/Off; Setting The Editor - Siemens SINUMERIK 840D sl Commissioning Manual

Functions

3.3 Switching the calculator help on/off

3.3 Switching the calculator help on/off
Procedure
You can activate/deactivate the calculator help function using the display machine data
MD9991 $MM_HMI_HELP_SYSTEMS.
● Bit 0 = 0 help display not active
● Bit 0 = 1 help display active (default setting)
3.4

Setting the Editor

The editor is available in the program and commissioning operating areas.
You can define editor settings as follows:
● In the display machine data MD9460 $MM_PROGRAM_SETTINGS.
● Via the user interface of HMI-Embedded.
Settings in the display machine data
Bit 2
Bit 4
Bit 5
Bit 6
Bit 7
The settings in the Program/Commissioning operating areas are retained after a reset.
34
= 0 No automatic enabling for programs
= 1 Automatic enabling for programs created using the "New" softkey.
= 0 Line feed will be displayed in an opened file in the edit field.
= 1 The LF (line feed) icon will be hidden in an opened file in the edit field.
= 0 Hidden lines marked with "*HD" (hidden) will be displayed.
= 1 Hidden lines marked with "*HD" (hidden) remain hidden.
= 0 Active program disabled for editing.
= 1 Active program enabled for editing.
= 0 Perform line test
= 1 Disable the line test of the cycle support for programs with a file size set
in the display machine data
MD9464 $MM_MAX_PROGRAMM_SIZE_CHECK. The size is entered
in KBytes. New lines can also be added within the G-Code created by
the "Wizard" or the geometry processor.
Commissioning HMI-Embedded (IM2)
Commissioning Manual, 01/2008, 6FC5397-8CP10-1BA0