Machine Data For Protection Levels - Siemens SINUMERIK 840DE sl Commissioning Manual

11/2006
11.1.4

Machine data for protection levels

Lockable
data areas
© Siemens AG 2006 All Rights Reserved
SINUMERIK 840D sl Commissioning Manual CNC: ShopMill – 11/2006 Edition
11.1
The machine manufacturer or end user can set operator panel machine data to
assign the appropriate protection levels for individual functions and data areas
For a number of data types, it is possible to input different protection levels for
read and write access authority.
The machine data which can be "locked" by means of protection levels in Shop-
Mill are listed below:
Operator panel machine data
9182 USER_CLASS_INCH_METRIC
9200 USER_CLASS_READ_TOA
9201 USER_CLASS_WRITE_TOA_GEO
9202 USER_CLASS_WRITE_TOA_WEAR
9203 USER_CLASS_WRITE_FINE
9206 USER_CLASS_WRITE_TOA_SUPVIS Change limit values for tool
9210 USER_CLASS_WRITE_ZOA
9215 USER_CLASS_WRITE_SEA
9216 USER_CLASS_READ_PROGRAM
(protection level must be ≤ 6)
9217 USER_CLASS_WRITE_PROGRAM
(protection level must be ≤ 5)
9218 USER_CLASS_SELECT_PROGRAM
(protection level must be ≤ 7)
9222 USER_CLASS_WRITE_RPA
9252 USER_CLASS_TM_SKTOOLLOAD
9253 USER_CLASS_TM_SKTOOLUNLOAD Enable unloading of a tool
9254 USER_CLASS_TM_SKTOOLMOVE
9258 USER_CLASS_TM_SKNCNEWTOOLE Enable setting up of new cutting
9259 USER_CLASS_TM_SKNCDELTOOL
9264 USER_CLASS_TM_SKTLNEWTOOL
9272 USER_CLASS_APPLICATION1
(for ShopMill on NCU (Emb.); protection level 1)
Access protection via password and keyswitch
Access to
Switch over between Inch/metric
Read tool offsets
Write tool geometry
(including type and
cutting edge)
Write tool wear (without
limit value)
Write fine tool wear and
fine offsets
monitoring
Write rough offsets
Write setting data
Read program
Write/edit program
Enable program selection
Write R parameters
Enable loading of a tool
Enable relocation of a tool
edges
Enable deleting of a tool
Enable setting up of a new tool
Release machine operating area
11 Miscellaneous
11-163