Opening And Closing The Program - Siemens SINUMERIK 840D sl Operating Manual

You have the option of archiving any files in the FTP server by creating new directories and
subdirectories.
Note
Selecting a program / execution
It is not possible to select a program directly on the FTP drive, and change to execution in the
"Machine" operating area.
Precondition
User name and password have been set up in the FTP server.
Procedure
14.2

Opening and closing the program

To view a program in more detail or modify it, open the program in the editor.
With programs that are in the NCK memory, navigation is already possible when opening. The
program blocks can only be edited when the program has been opened completely. You can
follow the opening of the program in the dialog line.
Milling
Operating Manual, 05/2017, A5E40868956
1. Select the "Program manager" operating area.
2. Press the "FTP" softkey.
When selecting the FTP drive for the first time, a login window is displayed.
3. Enter the user name and password and press the "OK" softkey to log into
the FTP server.
The content of the FTP server with its folders is displayed.
4. Press the "Log out" softkey after the required data processing has been
completed.
The connection to the FTP server is disconnected. In order to reselect
the FTP drive, you must log on again.
Managing programs
14.2 Opening and closing the program
687