Determining The License Requirement - Siemens SINUMERIK 840D sl Commissioning Manual

3.1

Determining the license requirement

Procedure
Searching for options
You have the possibility of finding options using the search function.
SINUMERIK Operate (IM9)
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
1. Press the "All options" softkey to list all the options that can be selected
for this controller.
- OR -
Press the "Missing lic./opt." softkey.
You receive an overview of all options that
• are not adequately licensed
• are licensed, but which were not set
2. Activate or deactivate the required options in the "Set" column:
• Activate checkbox or
• Enter the number of options
Options shown red are activated, however, not yet licensed or not
licensed in adequate number.
- OR -
Press the "Set option according to license" softkey to activate all of the
options contained in the license key.
You obtain a confirmation prompt that you must confirm with "OK".
3. To activate new selected options, press the "Reset (po)" softkey. A
safety prompt appears.
For several options, you will have to also restart SINUMERIK Operate.
Corresponding prompts will appear in the user response line.
4. Press the "OK" softkey to trigger a warm restart.
- OR -
Press the "Cancel" softkey to cancel the process.
1. The window "Licensing: All Options" or "Licensing: Non-licensed
Options" is open.
2. Press the "Search" softkey and enter the required option in the search
form.
The cursor is positioned on the first entry that corresponds to the search
term.
3. Press the "Continue search" softkey if the term that was found is not the
option that you were looking for.
3.1 Determining the license requirement
Licensing
27