Setting A Classic Filter - Siemens SINUMERIK 840D sl Operating Manual

Overview of the program data
2.5 Configuring filters
Delete filter
2.5.5

Setting a classic filter

In addition to the option of directly defining the filter at the control using SINUMERIK
Operate, there are filter links, which are created at the DNC server. The display of such filter
configurations are the classic filters. The variables are only displayed, but cannot be
modified.
For a detailed description of the filters created on the DNC server, please refer to the
following description:
Reference
Function Manual NC Program Management DNC; view filter
Use
Column
Variable
Operator
Value
Classic filter upload
20
1. Use the cursor to select the filter to be deleted in the filter list.
2. Press the "Delete filter" softkey.
You obtain a confirmation prompt as to whether the filter should be
deleted.
3. Press the "OK" softkey.
The filter is removed from the list.
- OR -
Press the "Cancel" softkey to cancel the delete operation.
Meaning
Individually set-up variable.
Specifies how the variable is linked with the value to the filter condition.
Specifies what the variable is processed with as filter condition.
1. The "Saved filters" window is opened.
In the selection box, you can select the desired filter.
The saved filters are displayed in alphabetical order.
2. Select the required filters, e.g. "classic1".
The associated comments are displayed next to the filter designation.
MCIS DNC - Direct Numerical Control
Operating Manual, 09/2011, 6FC5398-7DP20-1BA0