Hmi User Interface Software - Siemens SINUMERIK 840D sl Manual
Hide thumbs
Also See for SINUMERIK 840D sl:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
1.7
HMI User Interface Software
1.7
HMI (Human Machine Interface) is a software component used for operating and
programming machine tools. The HMI software is available in two variants:
● As the embedded variant (HMI-Embedded, ShopMill HMI, ShopTurn HMI) integrated in
● As HMI-Advanced; runs on PCU 50.3
Connection of embedded HMI
For the embedded HMI, the HMI software is used on the NCU 7x0. A thin client (TCU)
performs the NCU - operator panel communication.
Figure 1-3
Guide for the SINUMERIK 840D sl machine configuring
Manual, 07/2006 Edition, 6FC5397-6CP10-0BA0
the NCU software
Connection of embedded HMI
System overview
1.7 HMI User Interface Software
1-9
Advertisement
Table of Contents
