B3: Several operator panels connected to several NCUs, distributed systems - only 840D sl
type= ncu_573
nck_address= 15
plc_address= 15
; NETNAMES.INI, example 3 End
2.15.4
Quick M:N commissioning based on examples
Introduction
The MPI/OPI bus network rules are not described.
See References:
/BH/, Operator Components Manual
Three examples are used to demonstrate the steps involved in starting up an M:N grouping.
Each description begins by presenting a configuration.
2.15.4.1
Example 1
Hardware configuration
The hardware comprises the following components:
● 1 operator panel (PCU50 with HMI Advanced, operator panel, machine control panel)
● Two NCUs with two channels each
Figure 2-45
Extended Functions
Function Manual, 09/2009, 6FC5397-1BP20-0BA0
One operator panel for two NCUs
2.15 Examples
223