11/2006
11.1.5
Operator interface for ShopMill on the NCU (HMI Embedded)
Default
setting
© Siemens AG 2006 All Rights Reserved
SINUMERIK 840D sl Commissioning Manual CNC: ShopMill – 11/2006 Edition
11.1
The operating areas "Machine" and "Program" are by default hidden
without manufacturer password. In the operating area "Parameter" only the set-
ting data and the zero offsets can be seen without manufacture password.
You can change the display by means of the following machine data
9272 MM_USER_CLASS_APPLICATION [1] = 1
9272 MM_USER_CLASS_APPLICATION [3] = 1
9273 MM_USER_CLASS_APPLICATION [1] = 1
9273 MM_USER_CLASS_APPLICATION [2] = 1
9273 MM_USER_CLASS_APPLICATION [3] = 1
9273 MM_USER_CLASS_APPLICATION [4] = 1
9273 MM_USER_CLASS_APPLICATION [6] = 1
9273 MM_USER_CLASS_APPLICATION [10] = 1
9273 MM_USER_CLASS_APPLICATION [17] = 1
9414 MM_TM_KIND_TOOLMANAGEMENT = 1
Access protection via password and keyswitch
11 Miscellaneous
11-165