Data Lists; Machine Data; Nc-Specific Machine Data; Channelspecific Machine Data - Siemens SINUMERIK 840D sl Function Manual

2.19

Data lists

2.19.1

Machine data

2.19.1.1

NC-specific machine data

Number Identifier: $MN_
18082 MM_NUM_TOOL
18088 MM_NUM_TOOL_CARRIER
18094 MM_NUM_CC_TDA_PARAM
18096 MM_NUM_CC_TOA_PARAM
18100 MM_NUM_CUTTING_EDGES_IN_TOA
18102 MM_TYPE_OF_CUTTING_EDGE
18105 MM_MAX_CUTTING_EDGE_NO
18106 MM_MAX_CUTTING_EDGE_PERTOOL
18108 MM_NUM_SUMCORR
18110 MM_MAX_SUMCORR_PER_CUTTEDGE
18112 MM_KIND_OF_SUMCORR
18114 MM_ENABLE_TOOL_ORIENT
18116 MM_NUM_TOOL_ENV
2.19.1.2

Channelspecific machine data

Number Identifier: $MC_
20096 T_M_ADDRESS_EXT_IS_SPINO
20110 RESET_MODE_MASK
20120 TOOL_RESET_VALUE
20121 TOOL_PRESEL_RESET_VALUE
20125 CUTMOD_ERR
20126 TOOL_CARRIER_RESET_VALUE
20127 CUTMOD_INIT
20130 CUTTING_EDGE_RESET_VALUE
20132 SUMCORR_RESET_VALUE
20140 TRAFO_RESET_VALUE
20180 TOCARR_ROT_ANGLE_INCR[i]
Tools
Function Manual, 06/2019, A5E47435126B AA
Description
Number of tools that the NC can manage (SRAM)
Maximum number of the defined toolholders
Number of tool data (SRAM)
Number of data, per tool cutting edge for compile cycles
(SRAM)
Tool offsets in the TOA area (SRAM)
Type of D number programming (SRAM)
Maximum value of D number
Maximum number of D numbers per tool
Number of all sum offsets in the NC
Number of sum offsets per cutting edge
Properties of sum offsets in the TO area (SRAM)
Assign orientation to cutting edges
Tool environments in the TOA area (SRAM)
Description
Meaning of the address extension with T, M tool change
Definition of initial control setting after RESET/part pro‐
gram end
Tool length compensation at power-up (Reset/TP end)
Preselect tool on Reset
Fault handling for the function "Modification of the offset
data for rotatable tools"
Operative tool holder on Reset
Initialization value for CUTMOD
Tool cutting edge length compensation at power-up
(Reset/TP end)
Additive offset effective on reset
Transformation data record at power up (Reset/TP end)
Rotary axis increment of the tool carrier with orientation
capability
W1: Tool offset
2.19 Data lists
233