E.2 Setting Data - Siemens SINUMERIK 802D sl Programming Manual

04.07
Channel- - specific ($MC_ ... )
28080 NUM_USER_FRAMES
28082 MM_SYSTEM_FRAME_MASK
29210 NUM_PROTECT_AREA_ACTIVE
34100 REFP_SET_POS[0]
35000 SPIND_ASSIGN_TO_MACHAX
E.2 Setting data
Number
Axis- - specific
43120 $SC_DEFAULT_SCALE_FACTOR_AXIS
43240 $SA_M19_SPOS
42890 $SA_M19_SPOSMODE
Channel- - specific
42110 $SC_DEFAULT_FEED
42140 $SC_DEFAULT_SCALE_FACTOR_P
42150 $SC_DEFAULT_ROT_FACTOR_R
42520 $SC_CORNER_SLOWDOWN_START
42522 $SC_CORNER_SLOWDOWN_END
42524 $SC_CORNER_SLOWDOWN_OVR
42526 $SC_CORNER_SLOWDOWN_CRIT
43340 $SC_EXTERN_REF_POSITION_G30_1
© Siemens AG 2007 All rights reserved
SINUMERIK 802D sl/840D/840D sl/840Di/840Di sl/810D ISO Milling (PGM) - - 04.07 Edition
Identifier
Number of zero offsets
System frames (SRAM)
Activate protection zone
Reference position / not used when absolute
measuring system is applied
assign spindle / machine axis
Name
Default axial scale factor when G51 active
Position of spindle when programming M19
Positioning mode of spindle when comman-
ding M19
Default value for path feed
Default scale factor for address P
Default angle of rotation R
Distance before corner
Distance after corner
Feed override at corner with G62
Criterium for corner detection with G62
Reference point position for G30.1
Data Fields, Lists

E.2 Setting data

Refer- -
ence
V1
E-241