Requirements - Siemens SINUMERIK 840D sl Operating Manual

Requirements

In order to be able to use the EPLAN Add-In, you require the EPLAN functionality of the "API
AddIns" interface.
EPLAN versions
This documentation applies to the EPLAN Add-In version V1.9.
The EPLAN Add-In has been released for EPLAN electric P8 versions 2.3, 2.4 and 2.5.
The functionality of the Add-In is identical in all EPLAN versions. The only exception is the
definition of the PLC bus properties. The differences in the definition of the bus properties are
in the EPLAN software.
SINAMICS product catalog
The SINAMICS product catalog must be available and loaded. For further information on
settings, refer to Section "SINAMICS product catalog" (Page 17).
A current version of the SINAMICS product catalog will be delivered with the EPLAN Add-In.
When unpacking "EPlanPlugin.zip", the catalog is stored in the default directory.
SINUMERIK Integrate Create MyConfig - EPLAN Electric P8 Add-In
Operating Manual, 12/2017, A5E43099659B-AA
2
9